Needle felting is an inherently satisfying little craft, as I’ve mentioned once before. The materials are simple, the design principles easy to learn, and the results are wonderfully cute.
Of course, having handmade toys in the mix also makes your home feel more cozy. As a bonus, kids notice when you’ve put the effort in to make at least a few of the objects in their lives. It gives them a sense that things in their lives can be an act of creation, not just purchases from a store. And it may even inspire them, someday down the road, to make their own toys, which could never be a bad thing.
Below is a step-by-step guide to needle felting a sheep. But the principles could be applied to make virtually any animal at all (like these in my prior post), which is another aspect of this craft’s creativity. If you need more inspiration, there are wonderful felted animals and characters by crafters on Etsy (like here or here), or you could always check out a local wool and sheep festival. Our Maryland event last spring had a ton of vendors with lovely little creatures for sale.
Here’s what you need:
- A block of some material that can be poked (since I bought this poly foam, which is really the only un-green thing about the craft, I found a shop selling foam rubber, which I have not used but would be greener);
- A few felting needles (they break easily, so you’ll want a few to start, from Amazon or far better priced in bulk from wool shops like one, which usefully color coats their needle sets, or this shop on Etsy). Definitely pick up some larger needles, like a 38 gauge, as well as finer ones for finishing. As a favorite supplier explains:
The needles are available in several sizes or “gauges.” Most dry felting work, done with medium grade wool, uses 36 or 38 gauge. For finer surface work, or finer fibers, move up to 38 star or 40 gauge. For coarser fibers, move down to 32 gauge.
- A wooden handle for the needle if you like;
- Perhaps, if you like, a multi-need tool for the early stages (though this works better for flat projects, as I find multi-needle tools have a flattening effect);
- Some sharp scissors or wire cutters;
- Some roving in colors suited for your project (on Amazon here, or from a much better and cheaper selection on Etsy, e.g., here or here; you can also find even more eco-friendly plant dyed selections). Avoid superwash roving, which is used in spinning but which is not good for needle felting. To make the sheep, you’ll need a little black for the eyes, some gray and a chunk of off-white; and
- Two pipecleaners. White works well for this project.
The concept is straightforward: the needles are barbed, and each poke knits the roving together, eventually becoming more solid. The only rule is to keep the needle moving straight up and down, as the tip breaks easily.
The other precaution is to try to keep from poking your fingers, as the needles are super-sharp. This does not keep me from doing it in front of the television, though, so some injury is likely inevitable. But the sheep is worth it. Kind of.
To make the sheep:
Decide the dimensions. This sheep began with a ball of wool about 4 inches long and two inches across, and I wanted an animal about those proportions in the end, so as it became more compacted, I kept adding wool around it.
To save roving, you could also use wool batting in a ball on the inside, or even old balls of yarn, tightly wrapped, and wrap the cream colored roving around it by laying it out flat first and folding it around the ball, as I do with the Easter eggs here.
Poke the ball of wool with a needle (larger number needles or a multi-needle tool works well for this early stage). Turn the wool over and over to maintain the shape evenly and keep it oblong. Push on it with your finger to determine how felted it is becoming and measure the springiness, to keep it roughly even.
Once you have a nice shape formed, but before it becomes too tightly felted to create too much resistance, poke two pipecleaners through it at the front and rear ends of the sheep, which will form the basis for legs that allow it to stand up.
Trim the legs with sharp scissors or wire cutters so that they are even and fold over the sharp ends slightly to form the beginnings of feet. Stand it up to see whether it works, and adjust as necessary. The pipecleaners may not be of exactly identical length, because where they go through the shape may require more or less of the pipecleaner to be inside the body of the sheep.
Wrap additional roving around the sheep to add bulk and secure the legs inside the body. Poke and shape with your needle until the new wool is integrated, but leave what will become the neck area less worked than the body as a whole.
Rolling a small ball the right proportion for the head, add it to the body where a neck should be and secure it by poking the edges together with a needle.
Form the head, which on sheep is a bit oblong, and further shape the body. I find it helps to refer to pictures of the animal on line for details like head shape, which are critical to recognizing the animal.
Once the basic form has been created, shape the head into a triangle to form the nose and angle the shape towards a blunted point, adding more roving as you need and poking aggressively to flatten the sides.
Finish forming the head and neck, which on sheep I found requires a ring of additional roving around the back of the head and through the neck, which is thick but distinct.
Add gray to the front of the head.
Separately felt small circles the size for ears in grey wool, leaving one edge unfelted. Attach to the end to head at the two top corners and secure by poking with the needle.
Then flatten a handful of roving, aligning the fibers, and wrap the legs, poking through and around the pipe cleaner and trying to avoid the wire. Add grey to the end when you are satisfied that the leg is thick enough. Repeat for each leg.
Needle in two small balls of black roving for eyes, poking with the needle in the same spot over and over to keep them medium-sized. You may also want to add, as I did, some additional small amount of gray felt to make a ridge above the eyes to make them appear deeper-set.
Then add small tufts of white to the inside of the ears if you like, putting the sheep on its side and the ear against the block. You may need to add a small amount of gray to the back to thicken the ears if the white shows through.
Then, add a tail. Sheep actually have a natural tail that is long with a stringy end like a horse, but these are often docked on farms so a triangle is also fine.
Last, evaluate and wrap and fill in extra roving to really fill out the body and create more bulk. For the top coat of wool, leave some parts less felted in order to create a fluffy look.
Baa. Baa. Voila!
Other Crafting and Upcycling Ideas for Greener, More Sustainable Living: