Foxy: An Easy Tutorial for a Needle Felted Fox

IMG_2577In legends and myths from cultures around the world, the trickster is always the most interesting character. And they are often a fox, as in the book, The Tale of Tricky Fox, which features an addictive little sing-song and dance by the fellow.

So having a fox around to make trouble is useful. For one, if someone happens to do something naughty, both parent and child can blame it on that wily vulpine visitor.

Making a fox toy for your child is a fun little project as well. Below are simple instructions for needle felting your own personal trickster. I would estimate the project takes about ten hours or so, so it’s best tackled in front of some TV series you’ve been waiting to dive into. (I suggest Downton Abbey, so you can poke yourself with the needle every time Matthew is on-screen, to get used to the pain. Or you could just watch the Bill-and-Ted dance Foxy Lady on an endless loop. Totally up to you.)

As I’ve mentioned, I find needle felting a rewarding craft in which it’s shockingly easy to make something adorable, like this sheep or other animals. Once you’ve tackled the fundamentals a few times, you can make almost anything. It’s also very forgiving: you can easily change your mind about an addition or reshape the object as you go. The popularity of the sheep tutorial is what inspired me to offer up another one for this fox, but the principles are similar for both furry creatures.

Children — those over around 5 or 6 years old, depending on their level of patience and coordination — would also be able to make something this way, though you should probably start them on small cookie cutters and flat shapes first. Wet felting — like these Easter eggs — is great for that age and for younger crafters.

Here’s what you’ll need:

  • A block of some material that can be poked (since I bought this poly foam, which is really the only un-green thing about the craft, I found a shop selling foam rubber, which I have not used but would be greener);
  • A few felting needles (they break easily, so you’ll want a few to start, from Amazon or far better priced in bulk from wool shops like one, which usefully color coats their needle sets, or this shop on Etsy). Definitely pick up some larger needles, like a 38 gauge, as well as finer ones for finishing. As a favorite supplier explains:

    The needles are available in several sizes or “gauges.”  Most dry felting work, done with medium grade wool, uses 36 or 38 gauge.  For finer surface work, or finer fibers, move up to 38 star or 40 gauge.  For coarser fibers, move down to 32 gauge.

  • A wooden handle for the needle if you like;
  • Some sharp scissors or wire cutters;
  • Some roving in colors suited for your project (on Amazon here, or from a much better and cheaper selection on Etsy, e.g., here or here; you can also find even more eco-friendly plant dyed selections). Avoid superwash roving, which is used in spinning but which is not good for needle felting. To make the fox, you’ll need a fair amount of rusty red and off-white and a little black; and
  •  Two pipecleaners. Any color will work for this project.

The concept is straightforward: the needles are barbed, and each poke knits the roving together, eventually becoming more solid. The only rule is to keep the needle moving straight up and down, as the tip breaks easily.

The other precaution is to try to keep from poking your fingers, as the needles are super-sharp. This does not keep me from doing it in front of the television, though, so some injury is likely inevitable. Tant pis.

How to make the fox:

IMG_2519Start by forming an oblong ball in off-white roving and using the larger gauge needle to poke it into shape for the body. Continue turning the oblong over as you felt the roving, keeping the level of felting roughly uniform on all sides and front and back ends. Our fox was about four inches long and two inches high on the sides of the body. As it shrinks from being poked, lay more flat strands of felt around it to maintain the same approximate size. Leave the neck area a little less worked than the other portions of the body.

IMG_2520When you have a shape with the basic dimensions you’d like, but before it gets too tight and packed in, thread two pipecleaners through the approximate front and hind quarters of the fox-to-be, cut them at the appropriate leg length plus a smidge to allow for bending the tips in, and fold the wire tips over to make feet. Stand it up a few times to make sure you’ve gotten the lengths right, and adjust as needed.

IMG_2522Then make the head by forming and poking a ball separate from the body. Start with a oval, and as you work with it and it starts to respond better to the needle, angle the front and sides to create an elongated triangle. Foxes are all angles and snout in the front. Keeping a ridge where the eyes and ears will go is important as well, as above. Again, leave the neck less worked so as to allow for it to be easily attached to the body.

IMG_2523Add the formed head to the body, layering strips of additional wool around the ridge on the top of the head and the neck as needed.

IMG_2524Layer on the red by pulling to extract flattened pieces of roving, laying them onto the body and poking into place where you want it. Where you put your needle is where the wool will go. Look at images of foxes on-line as you may need: foxes have white underbellies, and red coats on top, with red markings on the top of their heads and white jaws below their noses.

IMG_2527IMG_2528 After you get the wool tacked onto the body as you need, add a layer of red wool to the legs as well, taking care not to break your needle on the wire inside the pipecleaner. Poke to the side of the wire, and around.

IMG_2531 IMG_2530Next make the ears by poking a small amount of red roving into a pointy triangle and leaving the bottom less worked. Attach to each side of the head at an angle. Finish all four legs and both ears.
IMG_2535IMG_2529IMG_2536Next, add a less-worked long clump of roving for the basic part of the tail. Work the attached part well into the body.

IMG_2539 IMG_2563Add a layer of black roving to the feet, with less density as it goes up the leg. In the uppermost picture, the left leg shows the worked roving and the right leg shows the work-in-progress.

IMG_2567Add black to the tail, and then a white tip.

IMG_2564 IMG_2565Needle features from very small amounts of roving into the face, including black and white touches in the ears and above the eyes. Add a little more red to the back of the ears if necessary to keep the black from showing through. Add white to fill out the belly and create a nice line.

Adjust the head shape as you like, checking it against pictures. Pay close attention to felting the details — there is a moment when the felt starts to respond to each poke, allowing you to shape your creature’s character and look. Don’t fret if things are perfectly symmetrical, as some differences add to the life-like imperfections.

You can always attempt a more artistic version than I did — many of the most life-like needle-felted foxes on-line have more loose roving to mimic fur on top. Since I intended it to take some damage as a toy, I made it more felted than this gorgeous artisan furball of a fox, for example. You can also get more fancy with adding small glass eyes from craft stores or on-line sources, as you wish.

IMG_2569Ready for mischief!

(As usual, none of the above links are commissioned.)

You might also like:

Sheepish: An Easy Needle Felting Tutorial for a Handmade Toy

IMG_6580 Needle felting is an inherently satisfying little craft, as I’ve mentioned once before. The materials are simple, the design principles easy to learn, and the results are wonderfully cute.

Of course, having handmade toys in the mix also makes your home feel more cozy. As a bonus, kids notice when you’ve put the effort in to make at least a few of the objects in their lives. It gives them a sense that things in their lives can be an act of creation, not just purchases from a store. And it may even inspire them, someday down the road, to make their own toys, which could never be a bad thing.

Below is a step-by-step guide to needle felting a sheep. But the principles could be applied to make virtually any animal at all (like these in my prior post), which is another aspect of this craft’s creativity. If you need more inspiration, there are wonderful felted animals and characters by crafters on Etsy (like here or here), or you could always check out a local wool and sheep festival. Our Maryland event last spring had a ton of vendors with lovely little creatures for sale.

IMG_6525Here’s what you need:

  • A block of some material that can be poked (since I bought this poly foam, which is really the only un-green thing about the craft, I found a shop selling foam rubber, which I have not used but would be greener);
  • A few felting needles (they break easily, so you’ll want a few to start, from Amazon or far better priced in bulk from wool shops like one, which usefully color coats their needle sets, or this shop on Etsy). Definitely pick up some larger needles, like a 38 gauge, as well as finer ones for finishing. As a favorite supplier explains:

    The needles are available in several sizes or “gauges.”  Most dry felting work, done with medium grade wool, uses 36 or 38 gauge.  For finer surface work, or finer fibers, move up to 38 star or 40 gauge.  For coarser fibers, move down to 32 gauge.

  • A wooden handle for the needle if you like;
  • Perhaps, if you like, a multi-need tool for the early stages (though this works better for flat projects, as I find multi-needle tools have a flattening effect);
  • Some sharp scissors or wire cutters;
  • Some roving in colors suited for your project (on Amazon here, or from a much better and cheaper selection on Etsy, e.g., here or here; you can also find even more eco-friendly plant dyed selections). Avoid superwash roving, which is used in spinning but which is not good for needle felting. To make the sheep, you’ll need a little black for the eyes, some gray and a chunk of off-white; and
  •  Two pipecleaners. White works well for this project.

The concept is straightforward: the needles are barbed, and each poke knits the roving together, eventually becoming more solid. The only rule is to keep the needle moving straight up and down, as the tip breaks easily.

The other precaution is to try to keep from poking your fingers, as the needles are super-sharp. This does not keep me from doing it in front of the television, though, so some injury is likely inevitable. But the sheep is worth it. Kind of.

To make the sheep:

Decide the dimensions. This sheep began with a ball of wool about 4 inches long and two inches across, and I wanted an animal about those proportions in the end, so as it became more compacted, I kept adding wool around it.

To save roving, you could also use wool batting in a ball on the inside, or even old balls of yarn, tightly wrapped, and wrap the cream colored roving around it by laying it out flat first and folding it around the ball, as I do with the Easter eggs here.

Poke the ball of wool with a needle (larger number needles or a multi-needle tool works well for this early stage). Turn the wool over and over to maintain the shape evenly and keep it oblong. Push on it with your finger to determine how felted it is becoming and measure the springiness, to keep it roughly even.

IMG_6526Once you have a nice shape formed, but before it becomes too tightly felted to create too much resistance, poke two pipecleaners through it at the front and rear ends of the sheep, which will form the basis for legs that allow it to stand up.

IMG_6527IMG_6530Trim the legs with sharp scissors or wire cutters so that they are even and fold over the sharp ends slightly to form the beginnings of feet. Stand it up to see whether it works, and adjust as necessary. The pipecleaners may not be of exactly identical length, because where they go through the shape may require more or less of the pipecleaner to be inside the body of the sheep.

IMG_6529Wrap additional roving around the sheep to add bulk and secure the legs inside the body. Poke and shape with your needle until the new wool is integrated, but leave what will become the neck area less worked than the body as a whole.

IMG_6531Rolling a small ball the right proportion for the head, add it to the body where a neck should be and secure it by poking the edges together with a needle.

IMG_6533 Form the head, which on sheep is a bit oblong, and further shape the body. I find it helps to refer to pictures of the animal on line for details like head shape, which are critical to recognizing the animal.

IMG_6535 Once the basic form has been created, shape the head into a triangle to form the nose and angle the shape towards a blunted point, adding more roving as you need and poking aggressively to flatten the sides.

IMG_6538Finish forming the head and neck, which on sheep I found requires a ring of additional roving around the back of the head and through the neck, which is thick but distinct.

IMG_6539  Add gray to the front of the head.

IMG_6541Separately felt small circles the size for ears in grey wool, leaving one edge unfelted. Attach to the end to head at the two top corners and secure by poking with the needle.

Then flatten a handful of roving, aligning the fibers, and wrap the legs, poking through and around the pipe cleaner and trying to avoid the wire. Add grey to the end when you are satisfied that the leg is thick enough. Repeat for each leg.

IMG_6546 IMG_6548Needle in two small balls of black roving for eyes, poking with the needle in the same spot over and over to keep them medium-sized. You may also want to add, as I did, some additional small amount of gray felt to make a ridge above the eyes to make them appear deeper-set.

Then add small tufts of white to the inside of the ears if you like, putting the sheep on its side and the ear against the block. You may need to add a small amount of gray to the back to thicken the ears if the white shows through.

Then, add a tail. Sheep actually have a natural tail that is long with a stringy end like a horse, but these are often docked on farms so a triangle is also fine.

Last, evaluate and wrap and fill in extra roving to really fill out the body and create more bulk. For the top coat of wool, leave some parts less felted in order to create a fluffy look.

IMG_6581Baa. Baa. Voila!

Other Crafting and Upcycling Ideas for Greener, More Sustainable Living:

An Abundance of Needling: A Bunch of Easy Needle Felting Craft Ideas

IMG_6602Summer has arrived. The weather has finally become too hot for gardening or running around to yard sales, so I thought I would slow down enough to share some pics of my latest obsession: needle felting.

I fully concede that succumbing to the call of needle felting is an utter Waldorf cliché. But I must tell you that it’s far and away the easiest and more rewarding of any crafting experience I’ve had to date (and that’s saying something, as I only do low-risk, high-reward craftiness). In a single evening in front of some mediocre TV, an animal will come together out of some loose wool roving. (And btw, my sister mocked me mercilessly re: the Waldorf “thing,” and then she also got obsessed, so she who laughs last…)

Even the supplies are simple. All you need is:

The idea is also straightforward: the needles are barbed, and each poke knits the roving together, eventually becoming more solid.

Here’s what the roving looks like:

IMG_6460And here’s the block, needle with handle, and the start of what will become a sheep (this is actually wool stuffing with cream-colored roving wrapped around::

IMG_6525Unlike wet felting, which is also great fun, this is not a craft for very young children, though kids of about 4 or older can certainly give it a go, with the proper warnings about the sharp needles. To start them off, you can use small, fondant or cookie cutters and some metal thimbles, and give them a small piece of roving to poke inside the cutter to make a flat shape. They can add eyes or other decoration, and even then felt it onto another piece of fabric if their patience holds, as I did below.

I used a cookie cutter shape to create butterflies for a sweater for Maya, using a discarded sweater as the base. First, I collected sweaters in adult sizes by asking for donations on the list serv of old, holey or cast-off sweaters made of 75 percent or higher natural fibers like wool or merino wool. Then I felted them in the washing machine with a little soap and few old tennis balls, using the hot setting and checking them until they had shrunk to a child’s size. Then I popped them into the dryer.

IMG_6258IMG_6260I chose a cute blue cardigan and made a few similar butterflies in a small number of colors, then needle felted them onto the front sides of the wet-felted cardigan, checking the back to make sure they were secure, and pinching up the sides to make it appear as though they may fly away at any moment. Voila, a new no-sew jacket! The result would work with any shape or theme:

IMG_6356IMG_6357I used a similar technique on another shrunken, felted sweater for a gift for my niece, by directly felting onto the front of the sweater (a multi-needle like this one made this go much faster):

IMG_6387IMG_6386The same approach can be used to free-hand flat shapes for a child’s felt board, by flipping a flat piece over and over until it comes together:

heartThen, I got into making felted animals. Oh boy, it was all over then. I’ll post next start to finish about how to make a sheep and an easy sleeve snake, but in the meantime, here’s some pics of my creations thus far.

IMG_6596IMG_6589IMG_6584IMG_6582IMG_6577IMG_6574IMG_6569IMG_6566 IMG_6565IMG_6455IMG_6563 IMG_6605This is a very rewarding craft, as it allows you to create adorable and durable hand-made toys for children or small sculptures. Maya loves playing with them and making scenes out of them. She also likes watching them come together and helping with choices for colors and shape. Hope you enjoy them as much as she does!

Related links: