In legends and myths from cultures around the world, the trickster is always the most interesting character. And they are often a fox, as in the book, The Tale of Tricky Fox, which features an addictive little sing-song and dance by the fellow.
So having a fox around to make trouble is useful. For one, if someone happens to do something naughty, both parent and child can blame it on that wily vulpine visitor.
Making a fox toy for your child is a fun little project as well. Below are simple instructions for needle felting your own personal trickster. I would estimate the project takes about ten hours or so, so it’s best tackled in front of some TV series you’ve been waiting to dive into. (I suggest Downton Abbey, so you can poke yourself with the needle every time Matthew is on-screen, to get used to the pain. Or you could just watch the Bill-and-Ted dance Foxy Lady on an endless loop. Totally up to you.)
As I’ve mentioned, I find needle felting a rewarding craft in which it’s shockingly easy to make something adorable, like this sheep or other animals. Once you’ve tackled the fundamentals a few times, you can make almost anything. It’s also very forgiving: you can easily change your mind about an addition or reshape the object as you go. The popularity of the sheep tutorial is what inspired me to offer up another one for this fox, but the principles are similar for both furry creatures.
Children — those over around 5 or 6 years old, depending on their level of patience and coordination — would also be able to make something this way, though you should probably start them on small cookie cutters and flat shapes first. Wet felting — like these Easter eggs — is great for that age and for younger crafters.
Here’s what you’ll need:
- A block of some material that can be poked (since I bought this poly foam, which is really the only un-green thing about the craft, I found a shop selling foam rubber, which I have not used but would be greener);
- A few felting needles (they break easily, so you’ll want a few to start, from Amazon or far better priced in bulk from wool shops like one, which usefully color coats their needle sets, or this shop on Etsy). Definitely pick up some larger needles, like a 38 gauge, as well as finer ones for finishing. As a favorite supplier explains:
The needles are available in several sizes or “gauges.” Most dry felting work, done with medium grade wool, uses 36 or 38 gauge. For finer surface work, or finer fibers, move up to 38 star or 40 gauge. For coarser fibers, move down to 32 gauge.
- A wooden handle for the needle if you like;
- Some sharp scissors or wire cutters;
- Some roving in colors suited for your project (on Amazon here, or from a much better and cheaper selection on Etsy, e.g., here or here; you can also find even more eco-friendly plant dyed selections). Avoid superwash roving, which is used in spinning but which is not good for needle felting. To make the fox, you’ll need a fair amount of rusty red and off-white and a little black; and
- Two pipecleaners. Any color will work for this project.
The concept is straightforward: the needles are barbed, and each poke knits the roving together, eventually becoming more solid. The only rule is to keep the needle moving straight up and down, as the tip breaks easily.
The other precaution is to try to keep from poking your fingers, as the needles are super-sharp. This does not keep me from doing it in front of the television, though, so some injury is likely inevitable. Tant pis.
How to make the fox:
Start by forming an oblong ball in off-white roving and using the larger gauge needle to poke it into shape for the body. Continue turning the oblong over as you felt the roving, keeping the level of felting roughly uniform on all sides and front and back ends. Our fox was about four inches long and two inches high on the sides of the body. As it shrinks from being poked, lay more flat strands of felt around it to maintain the same approximate size. Leave the neck area a little less worked than the other portions of the body.
When you have a shape with the basic dimensions you’d like, but before it gets too tight and packed in, thread two pipecleaners through the approximate front and hind quarters of the fox-to-be, cut them at the appropriate leg length plus a smidge to allow for bending the tips in, and fold the wire tips over to make feet. Stand it up a few times to make sure you’ve gotten the lengths right, and adjust as needed.
Then make the head by forming and poking a ball separate from the body. Start with a oval, and as you work with it and it starts to respond better to the needle, angle the front and sides to create an elongated triangle. Foxes are all angles and snout in the front. Keeping a ridge where the eyes and ears will go is important as well, as above. Again, leave the neck less worked so as to allow for it to be easily attached to the body.
Layer on the red by pulling to extract flattened pieces of roving, laying them onto the body and poking into place where you want it. Where you put your needle is where the wool will go. Look at images of foxes on-line as you may need: foxes have white underbellies, and red coats on top, with red markings on the top of their heads and white jaws below their noses.
After you get the wool tacked onto the body as you need, add a layer of red wool to the legs as well, taking care not to break your needle on the wire inside the pipecleaner. Poke to the side of the wire, and around.
Next make the ears by poking a small amount of red roving into a pointy triangle and leaving the bottom less worked. Attach to each side of the head at an angle. Finish all four legs and both ears.
Next, add a less-worked long clump of roving for the basic part of the tail. Work the attached part well into the body.
Needle features from very small amounts of roving into the face, including black and white touches in the ears and above the eyes. Add a little more red to the back of the ears if necessary to keep the black from showing through. Add white to fill out the belly and create a nice line.
Adjust the head shape as you like, checking it against pictures. Pay close attention to felting the details — there is a moment when the felt starts to respond to each poke, allowing you to shape your creature’s character and look. Don’t fret if things are perfectly symmetrical, as some differences add to the life-like imperfections.
You can always attempt a more artistic version than I did — many of the most life-like needle-felted foxes on-line have more loose roving to mimic fur on top. Since I intended it to take some damage as a toy, I made it more felted than this gorgeous artisan furball of a fox, for example. You can also get more fancy with adding small glass eyes from craft stores or on-line sources, as you wish.
(As usual, none of the above links are commissioned.)
You might also like: